SHIFT CONTROLS IFPA-480-1P-35A Temperature Control Panel Pid Thermocouple Electric Heater Country Region

( Brand: Shift Controls ), ( Manufacturer Part Number: IFPA-480-1P-35A ), ( Part Type: Control Panel Heater ), ( Country/region Of Manufacture: United States ), ( Voltage: 480 Volts Ac ), ( Phase S : Single ), ( Full Load Current: 35 Amps ), ( Full Load Power: 16.8 Kw ), ( Power Controller: Scr ), ( Controller Type: Pid, Programmable Ramp/soak ), ( Input Connection: Thermocouple Terminal Block ), ( Power Connection: Terminal Blocks ), ( Environmental Ratin: Nema 4x ), ( Communication: Rs-485 Modbus, Rtu And Ascii ), ( Temperature Retransmit: 4-20 Ma ), ( Alarm Interface: Programmable, Dry Contacts ), ( Input Type: Thermocouple ), ( Enclosure Material: Polycarbonate )

Review SHIFT CONTROLS Industrial Temperature Control Panel Pid Scr Thermocouple Electric Heater

The IFPA-480-1P-35A Temperature Control Panel with PID SC and Thermocouple Electric Heater is a high-performance, industrial-grade temperature control solution designed for use in various applications. This panel is suitable for countries and regions with electrical standards that conform to the 480V, 1-phase power supply.

The control panel features a PID (Proportional-Integral-Derivative) controller, which provides precise temperature control by continuously adjusting the output of the integrated electric heater based on the measured temperature and the setpoint. This ensures stable and accurate temperature maintenance, even in dynamic environments.

The control panel is equipped with a thermocouple input, which allows for the measurement of temperatures up to 850 C (1562 F). The thermocouple input is rugged and can withstand harsh industrial conditions, ensuring reliable temperature measurements.

The electric heater integrated into the control panel is designed to provide fast and efficient heating, with a power rating of 35A. The heater is compatible with the PID controller, enabling precise temperature control for optimal performance.

The control panel is housed in a NEMA 4X enclosure, which is rated for use in wet, dusty, or corrosive environments. The enclosure is designed to provide protection against water, dust, and corrosion, ensuring long-term performance and reliability.

In summary, the IFPA-480-1P-35A Temperature Control Panel with PID SC and Thermocouple Electric Heater is a robust and reliable solution for precise temperature control in various industrial applications. Its PID controller, thermocouple input, and rugged electric heater make it a versatile and high-performance temperature control solution, while its NEMA 4X enclosure ensures long-term reliability.

1. Precise temperature control: The PID (Proportional-Integral-Derivative) controller in the panel ensures precise temperature control, maintaining a stable temperature within a narrow range.

2. Safe operation: Thermocouple sensors provide reliable temperature measurement, reducing the risk of overheating or underheating the system.

3. Energy-efficient: The electric heater is designed to consume minimal energy while providing appropriate heat, helping to reduce energy costs.

4. Easy to install and use: The panel is pre-wired and comes with clear instructions, making it easy for users to install and operate.

5. Durable construction: The panel is built with high-quality materials that can withstand harsh environments, ensuring long-lasting performance.

6. Wide voltage range: The panel is designed to operate on a wide voltage range (120V-240V), making it suitable for use in various countries and regions.

1. Higher upfront cost: Compared to basic temperature controllers, the panel's advanced features may result in a higher initial investment.

2. Complex setup: While the panel is easy to install, the PID control and thermocouple setup may require some technical knowledge, which might be a challenge for users without experience in temperature control systems.

3. Limited compatibility: The panel may not be compatible with certain types of heaters or sensors, which could limit its versatility.

The IFPA-480-1P-35A Temperature Control Panel with PID, SC, Thermocouple, and Electric Heater is an excellent choice for users seeking precise temperature control, energy efficiency, and durability. Although it has a higher upfront cost and may require some technical knowledge for setup, its benefits, such as enhanced safety, ease of use, and suitability for various voltage ranges, make it a worthwhile investment for many applications.

If you're looking for a reliable and high-performance temperature control solution, the IFPA-480-1P-35A panel is a great option. Consider consulting with a technical expert to ensure compatibility with your specific application and to help with the PID and thermocouple setup, if needed.

Details:

Applications: ifpa series temperature control panels are ideal for controlling 120 volt heat trace and cable, immersion heaters, process gas preheats, retort muffle furnaces, other restive heaters. Designs, manufacturers and sells industrial temperature control panels, built with exceptional quality, safety, features, support.

Safety power contractor is physically disconnected from the heater by an when following occurs: safe run switch placed in position over-temperature condition occurs PVC alarm temp a sensor fault ex. The temperature control panel power connections are terminal blocks for easy conduit installation. About Shift Controls, inc.

All panels are manufactured in the USA with highest quality components and construction standards. Seamlessly integrate your control system with a 4-20ma temperature retransmit, user programmable alarm contacts, rs-485 modbus, and optional external interlock.

8x environmental specifications enclosure material polycarbonate with stainless steel hardware rating nema 4x wash down rated, ip66 ambient temperature 32 to 95 f 35 c indoor use only storage range 4 149 65 relative humidity non-condensing altitude 2000 m or less product safety Shift Controls is committed producing a where paramount.

The panel design complies with or exceeds ul508a and nec electrical codes. External remote enable interlock relay add the ability to remotely and disable temperature control panel. Front panel safe run switch a two-position selector allows an operator to place the temperature control in mode when not use.

Product options Shift Controls understands having the right available reduces installation time and costs. Control wiring is separated from the main power wiring, through fuse protection, reducing risk to user and connected systems. Main branch fuse size panel maximum rated standard protection of heater loads should be sized to at least 125 and not more than power controller manufacturer recommendation the heaters full load current.

Thermocouple becomes disconnected the optional external interlock relay is DE-energized this feature ensures power from heater to protect personnel and equipment during a fault, over-temperature condition or when not in use.

Current-limiting main branch fusing all panels feature which comply with power distribution requirements. Visit our site for the full line of products, many more product options, custom solutions, and links documentation support. When the enable interlock relay coil is energized, safety power contractor energized and controller put into run mode. The temperature controller offers a robust industrial solution for your control requirements.

All enclosures include an integrated fused disconnect, front mount safe run control switch, and a safety contractor to positively disconnect the heater from power when in switch position, over-temperature alarm state, or thermocouple fault condition. Panels will include a set fuses sized for the panel maximum allowable current. Power is controlled by a zero-cross scr for precise temperature control.

Finger-safe ip2x construction the interior of panel is designed and constructed to be fully which can reduce risk accidental contact with energized parts during OSHA Napa 70e allowable work. The nema 4x corrosion resistant enclosure is ideal for your most demanding industrial and laboratory environments. This DE-energizes the safety contractor and places controller in a stop mode.

External standard size thermocouple jack panel connector an externally accessible option, allowing thermocouple to be swapped easily and quickly. The temperature input connection is a bi-metal type-k thermocouple terminal block.

part #: ifpa4801p35a prices

• $32.00-$159.99

specifications temperaturcontr:

• brand: Shift Controls
• mpn: Ifpa-480-1p-35a
• part type: Control Panel Heater
• country/region of manufacture: United States
• voltage: 480 Volts Ac
• phase s : Single
• full load current: 35 Amps
• full load power: 16.8 Kw
• power controller: Scr
• controller type: Pid, Programmable Ramp/soak
• input connection: Thermocouple Terminal Block
• power connection: Terminal Blocks
• environmental ratin: Nema 4x
• communication: Rs-485 Modbus, Rtu And Ascii
• temperature retransmit: 4-20 Ma
• alarm interface: Programmable, Dry Contacts
• input type: Thermocouple
• enclosure material: Polycarbonate

Returns temperaturcontr:

• paid by: Buyer
• time: 30 Days
• type: Money back or replacement buyers choice
• policy: returns accepted

General temperaturcontr:

• business industrial > electrical test equipment > industrial automation control business industrial > temperature controllers industrial automation control
• condition: New
• in stock: Yes

Offer temperaturcontr:

• Sold: 0
• bids: 0
• quantity: 1
• Started: May 11, 2017, 11:16 am
• best offer: true

Shipping temperaturcontr:

• cost: $0.0
• handling: 2 days
• type: Flat

Payments temperaturcontr:

• PayPal

Seller temperaturcontr:

• zipcode: 80020
• city: Broomfield, Colorado

Shift Controls IFPA-480-1P-35A Is Similar To:

• Ifpa-120-1p-35a Shift Controls Li Country-region (95.8% similar) Front panel safe run switch a two-position selector allows an operator to place the temperature control in mode when not use. This DE-energizes the safety contractor and places controller in a stop mode. Control wiring is separated from the main power wiring, through fuse protection, reducing risk ...(June 9th, 2017)
• Ifpa-208-1p-35a Shift Controls Li Country-region (95.8% similar) Factory stocked options 24 CDC coil, 120V vac coil input sensor type thermocouple type: k, j custom typically 7-DAY lead-time thermocouple t, e, n, r,, b, l, u, TX ETD: JPT1 PT1 NI120, CU50 analog: 0-50MV, 0-5V, 0-10V, 4-20MA, 0-20MA connection internal din mount bi-metal screw terminal block a ...(May 12th, 2017)
• Ifpa-240-1p-35a Shift Controls Li Country-region (97.9% similar) The temperature controller offers a robust industrial solution for your control requirements. 8x environmental specifications enclosure material polycarbonate with stainless steel hardware rating nema 4x wash down rated, IP66 ambient temperature 32 to 95 f 35 c indoor use only storage range 4 149 65...(May 11th, 2017)
• Ispa-120-1p-15a Shift Controls Li Country-region (91.7% similar) Control wiring is separated from the main power wiring, through fuse protection, reducing risk to user and connected systems. Main branch fuse size panel maximum rated standard protection of heater loads should be sized to at least 125 and not more than power controller manufacturer recommendation ...(April 25th, 2017)