HAYS CLEVELAND C1-3007-0000-A1H Temperature Controller Rtd C1-3007-0000/A1H Module RS485

( Brand: Hays Cleveland ), ( Manufacturer Part Number: C1-3007-0000/A1H ), ( Part Type: Controller Module ), ( Sensor Type: Rtd ), ( Communication Standard: Rs485 )

Review HAYS CLEVELAND C1-3007-0000/a1h C1 Temperature Controller Module Rs485 Rtd

The **Hayward Hays Cleveland C1-3007-0000/A1H C1 Temperature Controller Module (RS485, RTD)** is a high-performance, modular temperature control solution designed for precision applications in industrial, commercial, and municipal water treatment systems. Part of the robust C1 series, this controller module integrates seamlessly into Hayward s advanced pool and spa automation platforms, offering reliable and adaptable temperature regulation for systems requiring accurate monitoring and control. Built with a focus on durability and efficiency, the C1-3007-0000/A1H features a **4-20mA analog input** paired with **RS485 communication**, enabling seamless integration with SCADA systems, PLCs, or other industrial networks for centralized monitoring and control. The module supports **RTD (Resistance Temperature Detector) sensors**, providing precise temperature readings across a wide range of applications, from large-scale swimming pools and water parks to commercial hot tubs and industrial water heating systems.

At its core, this temperature controller module delivers **high-resolution temperature control** with a **0.1 C accuracy**, ensuring optimal performance in environments where even minor temperature fluctuations can impact efficiency or water quality. The **RS485 communication protocol** allows for long-distance data transmission with minimal signal degradation, making it ideal for distributed systems where wired connectivity is preferred over wireless solutions. Additionally, the module s **modular design** enables easy installation and retrofitting into existing Hayward C1 automation systems, reducing downtime and simplifying maintenance. With **programmable setpoints, PID control algorithms, and configurable alarm thresholds**, operators can fine-tune performance to meet specific operational requirements, whether balancing energy efficiency, maintaining water chemistry, or ensuring compliance with regulatory standards.

Safety and reliability are prioritized in the C1-3007-0000/A1H s design, featuring **over-temperature protection** and **fault diagnostics** to prevent equipment damage and minimize operational disruptions. The module s **wide operating temperature range** (typically -20 C to 85 C) ensures consistent performance in varying environmental conditions, while its **low-power consumption** contributes to energy savings in long-term applications. Whether deployed in a standalone configuration or as part of a larger automation network, this temperature controller module exemplifies Hayward s commitment to delivering **scalable, intelligent, and user-friendly solutions** for modern water management systems. Its compatibility with Hayward s **C1 automation platform** further enhances its versatility, allowing for integration with other modules such as pumps, valves, and sensors to create a fully automated and optimized control system.

**Pros and Cons of buying a Hays Cleveland C1-3007-0000/A1H RS485 RTD Temperature Controller Module**

### **Pros**

1. **Precision and Reliability** The C1-3007 is designed for industrial applications, offering accurate temperature control with RTD (Resistance Temperature Detector) sensors, which are known for their stability and long-term accuracy. This makes it suitable for environments where consistency is critical, such as HVAC systems, process control, or laboratory settings.

2. **RS485 Communication** The module supports RS485 communication, a robust industrial standard that allows for long-distance data transmission (up to 1.2 km) and resistance to electrical noise. This is beneficial in large facilities where multiple devices need to be networked without signal degradation.

3. **Modular and Expandable Design** The C1 series is part of a modular system, meaning it can be integrated with other Hays Cleveland controllers, sensors, and actuators. This flexibility allows for system expansion or reconfiguration as operational needs evolve.

4. **User-Friendly Interface** The controller features a clear display and intuitive programming, making it accessible for technicians without requiring advanced expertise. Many models in this series also support remote monitoring via software, simplifying diagnostics and adjustments.

5. **Wide Temperature Range** Depending on the sensor used, the C1-3007 can handle a broad range of temperatures, from cryogenic to high-temperature applications. This versatility makes it adaptable to diverse industrial processes.

6. **Durability and Build Quality** Hays Cleveland products are engineered for harsh environments, with robust enclosures and components resistant to dust, moisture, and temperature fluctuations. This ensures longevity and reduced maintenance downtime.

7. **Compatibility with PLCs and SCADA Systems** The RS485 interface allows seamless integration with Programmable Logic Controllers (PLCs) and Supervisory Control and Data Acquisition (SCADA) systems, enabling centralized control and data logging.

8. **Energy Efficiency** Precise temperature control can optimize energy usage in heating or cooling systems, leading to cost savings over time, especially in large-scale applications.

9. **Support for Multiple Protocols** While primarily RS485, some models in the C1 series may support additional protocols (e.g., Modbus RTU), enhancing interoperability with existing infrastructure.

10. **Warranty and Technical Support** Hays Cleveland is a reputable brand with strong after-sales support, including warranties and access to technical documentation or troubleshooting assistance.

---

### **Cons**

1. **Cost** Industrial-grade temperature controllers like the C1-3007 are generally more expensive than basic or consumer-grade alternatives. The initial purchase price, along with potential calibration or installation costs, may be prohibitive for small-scale or budget-conscious applications.

2. **Complexity for Beginners** While user-friendly, the programming and setup of industrial controllers can be overwhelming for users without prior experience in automation or control systems. Training or consulting may be required to fully utilize its features.

3. **Limited Built-in Functions** Compared to advanced PLCs or dedicated SCADA systems, the C1-3007 may lack sophisticated features such as advanced algorithms, extensive logging capabilities, or built-in safety protocols (e.g., fail-safe modes). Additional hardware or software may be needed for complex applications.

4. **Sensor Dependency** The accuracy and performance of the controller are directly tied to the quality of the RTD sensor. Poor-quality or improperly installed sensors can lead to inaccurate readings and control issues.

5. **Maintenance Requirements** Industrial controllers require periodic calibration, firmware updates, and hardware inspections to ensure optimal performance. Neglecting maintenance can lead to drift in accuracy or system failures.

6. **Learning Curve for RS485 Setup** Configuring RS485 communication, including baud rate, parity, and addressing, can be error-prone if not done correctly. Misconfigurations may result in communication failures or data corruption.

7. **Limited Local Display** Some models may have basic displays, which can be less intuitive than touchscreen interfaces found in newer controllers. This may require reliance on external devices for monitoring.

8. **Vendor Lock-In** Hays Cleveland s proprietary systems may limit compatibility with third-party software or hardware, potentially restricting future upgrades or customization options.

9. **Physical Space and Installation** Industrial controllers require dedicated space and proper wiring, which may not be feasible in constrained or retrofitted systems. Installation complexity can also increase labor costs.

10. **Potential for Obsolescence** As technology evolves, newer controllers may offer superior features (e.g., wireless connectivity, cloud integration, or AI-driven optimization). Investing in the C1-3007 may mean missing out on future advancements unless the system is designed for modular upgrades.

---

### **Ending Conclusion**

The **Hays Cleveland C1-3007-0000/A1H RS485 RTD Temperature Controller Module** is a robust, reliable, and precise tool for industrial temperature control applications. Its strengths lie in its accuracy, durability, modularity, and compatibility with industrial communication standards, making it ideal for environments where stability and integration with larger systems are critical. However, its higher cost, complexity for non-experts, and potential limitations in advanced features may not justify its purchase for simple or small-scale applications.

For users requiring **high-precision temperature control in industrial, HVAC, or process automation settings**, this controller is a strong choice, especially when paired with compatible sensors and communication infrastructure. Conversely, those seeking **cost-effective, plug-and-play solutions** or **advanced features like cloud connectivity** may find better alternatives in lower-cost or more modern controllers.

---

### **Recommendation**

- You need a **highly accurate, industrial-grade temperature controller** for critical applications (e.g., manufacturing, laboratory, or large-scale HVAC systems).

- Your system requires **RS485 communication** for long-distance or noisy environments.

- You are already using **Hays Cleveland or compatible modular systems** and want seamless integration.

- Budget constraints are not a primary concern, and the long-term reliability outweighs the initial cost.

- You are working with a **small-scale or low-budget project** where a simpler, cheaper controller (e.g., analog or basic digital models) would suffice.

- You need **advanced features** like wireless connectivity, touchscreen interfaces, or AI-driven optimization, which this model lacks.

- Your team lacks experience with **industrial controllers**, and the learning curve or setup complexity is a concern.

- You prioritize **future flexibility** and may benefit from more open or scalable systems (e.g., PLCs with Modbus or Ethernet support).

For most **industrial or professional applications demanding precision and reliability**, the C1-3007 is a **solid investment**. However, always evaluate your specific requirements such as budget, system integration, and long-term maintenance before making a final decision.

Details:

Hays Cleveland C1 Temperature Controller Module C1-3007-0000/A1H RS485 RTD.

part #: c130070000a1h price

• $250.00

specifications temperaturcontr:

• brand: Hays Cleveland
• mpn: C1-3007-0000/a1h
• part type: Controller Module
• sensor type: Rtd
• communication standard: Rs485

payments temperaturcontr:

• credit card: Mastercard
• wallet: Google-pay
• other

seller temperaturcontr:

• city: Houston, Texas
• rating: 97.1%
• # reviews: 32

returns temperaturcontr:

• policy: No Returns

shipping temperaturcontr:

• carrier: USPS
• transit: 2-6 Days
• cost: $0.00
• service: USPS Ground Advantage
• class: Standard
• type: Fixed

offer temperaturcontr:

• quantity: 1
• sold: 0
• best offers: True
• availability: In Stock
• started: May 27, 2026
• options: Ship-to-home

general temperaturcontr:

• condition: Used
• PLCs HMIs > PLC Peripheral Modules > PLC Temperature Modules

Hays Cleveland C1-3007-0000-A1H Is Similar To:

• Cleveland C-07000 ac15 302000 Hays Temperature process Control Free Shipping (57.3% similar) The Hays Cleveland temperature/process control C-07000/AC15/302000 is a reliable and efficient industrial automation module designed for temperature process control applications. Ships with ups ground saver. Produced by the trusted brand Cleveland, this plc peripheral module ensures precise and ...(March 12th, 2026)