CRYOCON 32-32B Cryogenic Temperature Controller Digital Display 2TE-255660-009 1A13 6503

( Brand: Cryocon ), ( Manufacturer Part Number: 32/32B ), ( Part Type: Digital Display Controller )

Review CRYOCON Model 32b Cryogenic Temperature Controller Digital Display

The 2TE-255660-009 Cryocon 32B Cryogenic Temperature Controller is a high-performance digital device designed specifically for controlling temperatures in cryogenic applications. This controller features a robust 32-bit microprocessor that ensures precise and reliable temperature regulation, making it an ideal choice for scientists, researchers, and engineers working in the field of low-temperature physics, material science, or cryotechnology.

The device boasts a large, easy-to-read digital display with a resolution of 0.01 C, allowing for precise temperature monitoring. It supports a wide temperature range of -273.15 C to 125 C, making it suitable for a variety of cryogenic environments. The Cryocon 32B also features a user-friendly interface, with intuitive menus and clear status indicators, allowing for easy operation and configuration.

The controller is equipped with a wide range of inputs and outputs, including 1 analog input, 2 digital inputs, 2 digital outputs, and 1 RS-232/485 interface. It supports various temperature sensors, such as PT100, PT1000, and thermocouples, ensuring compatibility with a wide range of temperature measurement devices. The device also features a built-in alarm system, which can be configured to alert users of temperature deviations or other critical conditions.

The Cryocon 32B is designed with high-quality components and is built to withstand harsh environmental conditions. It is compact, rugged, and resistant to moisture, dust, and other contaminants, making it suitable for use in laboratories, research facilities, and other demanding environments. The controller is also equipped with a battery backup feature, ensuring that temperature monitoring and control continue even in the event of a power failure.

In summary, the 2TE-255660-009 Cryocon 32B Cryogenic Temperature Controller is a reliable, high-performance device designed for precise temperature regulation in cryogenic applications. Its wide temperature range, large digital display, user-friendly interface, and extensive input/output capabilities make it an ideal choice for scientists, researchers, and engineers working in the field of low-temperature physics and material science.

1. Digital Display: The device features a digital display, providing clear and accurate temperature readings.

2. Wide Temperature Range: It can control temperatures from -196 C to 100 C, making it suitable for a variety of cryogenic applications.

3. 32-bit Processor: The 32-bit processor ensures fast and reliable operation, with high precision and stability.

4. Programmable Relay: The controller has a programmable relay that can be used to turn on or off equipment based on the temperature.

5. RS-485 Communication: The device supports RS-485 communication, allowing it to be connected to other devices or a computer for remote monitoring and control.

1. Price: The price of the controller is relatively high compared to some other temperature controllers on the market.

2. Complexity: The device may be too complex for some users who require a simpler temperature controller.

3. Requires Power Supply: The controller requires a separate power supply, which may add to the overall cost and complexity of the system.

4. Limited Inputs: The device only has two input channels, which may not be sufficient for systems requiring more temperature sensors.

The 2TE-255660-009 Cryocon 32B Cryogenic Temperature Controller is a high-performance device suitable for demanding cryogenic applications. Its wide temperature range, digital display, and 32-bit processor make it a reliable and accurate temperature controller. However, its high price and complexity may deter some users. If cost is not a major concern and the device's features are required, then the Cryocon 32B is a recommended option. For those with a lower budget or simpler requirements, other temperature controllers may be more suitable.

Details:

Manufacturer: Cryocon model: 32b temperature controller model: 2te 1A13user manual here. Data rates are 3 12 48 96 19,200 and 38,400 baud. Display resolution: user delectable to seven significant digits.

0ppm of full-scale power 20 bits or 60hz, 150va. The entire risk as to quality and performance of equipment is with buyer. Display units: k, c, f or native sensor units. Control type: paid table, enhanced paid, ramp or manual.

Isolation: input channel circuits are electrically isolated from all other internal circuitry measurement filter. Input impedance is 25hz bipolar square-wave sample rate: 10hz per channel measurement resolution: sensor dependent digital 24 bits drift: 25ppm c excitation: constant current: 1ma, 100ua or 10ua voltage : 10mv RMS excitation Control outputs number of loops: two input: either sensor input.

2 compliant.

0ppm of full-scale power 20 bits. Minimum load: 10 in 25w setting, 40 50w setting.

Loop 1 primary heater output type: short circuit protected linear current source. 5w when used with a 50 load.

Set-point accuracy: six significant digits. Input channels there are two channels, each of which may be independently configured for any the supported sensor types. Power requirement: 1 120, 220 or 240vac.

10a full-scale, which correspond to 50w, 5. Limited warranty buyer acknowledges that the equipment is being sold as and without any of merchant ability or fitness for a particular use.

0ma to 10na in steps of 5 power. Redbacks: heater output power, heat sink temperature. Load resistance: 25 or sensor connection: 4-wire differential din-5 din-6 connectors selection: front panel remote interface.

PDF: user interface display type: 20 x 2 character FD, 9mm height .

Up to 16 entries table. Number of inputs displayed: two keypad: sealed silicon rubber. Display update rate.

Resistance measurement type: radiometric bridge range constant- voltage , maximum 100k ac excitation frequency: resistor sensors in constant- voltage mode: Heaters down to 10 can be used with the 25 range. Status outputs audible and visual alarms: independent remote alarms.

5, 1, 2, 4, 8, 16, 32 and 64 seconds. Auto tune: minimum band width paid loop design.

Model 32 m32um. Fault monitors: control loops are disconnected upon detection of a sensor or excessive internal temperature. Remote interfaces are electrically isolated to prevent ground loops programming language is IEEE CPI compliant.

Temperature display: six significant digits, auto ranged. Loop update rate: 10hz per. Dimensions: 8. Loop 2 output type: voltage output, to 10 volts .

Rs-232: serial port is an rs-232 standard null modem.

There are no internal jumpers or switches. Paid and heater range.

Buyer may inspect the equipment prior to purchase and placement of order. Paid tables: six user tables available for storage of set point vs.

specifications temperaturcontr:

• brand: Cryocon
• mpn: 32/32b
• part type: Digital Display Controller

Returns temperaturcontr:

• policy: returns accepted
• paid by: Buyer
• time: 30 Days
• type: Money Back

Payments temperaturcontr:

• PayPal

Ratings:

1. Great seller. Very nice and very true to products. 01-11-19
2. The lathe arrived promptly seems to be working well. excited to use it 01-16-19
3. Great deal, excellent condition 01-18-19
4. Great communication. A pleasure to do business with. 01-16-19
5. 110% satisfied seller is first class 01-23-19

General temperaturcontr:

• condition: Used
• PLC Peripheral Modules > PLC Temperature Modules
• in stock: Yes

Seller temperaturcontr:

• rating 01-23-19: 100.0%
• city: Goleta, California
• zipcode: 93117
• # feedbacks 01-23-19: 1105

Offer temperaturcontr:

• bids: 0
• quantity: 1
• Started: January 23, 2019, 10:24 pm
• Sold: 0
• best offer: false

Shipping temperaturcontr:

• type: Calculated
• handling: 1 days